Devcon Plastic Steel® Putty (Repair 10110) – 453g

Overview:
A high-performance steel-filled epoxy compound designed for repairing worn or damaged steel parts and machinery. Once cured, it can be drilled, tapped, machined, sanded, or painted for a professional-grade finish. Ideal for metal bonding, rebuilding, and surface restoration applications.

Features & Benefits:

✔ Steel-filled epoxy for permanent repairs
✔ Waterproof and chemical resistant
✔ Sandable, machinable, and paintable
✔ Excellent gap-filling properties
✔ Bonds to steel, aluminum, and other metals

Recommended Applications:

🔧 Repair cracks, chips, and worn surfaces
🔧 Rebuild machinery, tools, vehicles, and appliances
🔧 Fill voids and make holding fixtures
🔧 Bonds strongly to itself and other metals

Preparation:

Ensure all surfaces are clean, dry, and free of oil, grease, and dust. For best adhesion, roughen metal surfaces with sandpaper or a wire brush before applying.

Application:

1. Mix resin and hardener thoroughly in 2.5:1 ratio until color is uniform.

2. Apply to prepared surfaces immediately.

3. Avoid applying on oily or greasy areas.

4. For non-bonding areas, lightly coat with Vaseline or oil.

Removal Methods:

• Metal, Ceramic, Glass: Heat above 170°C to weaken; sand, file, or drill if necessary.

• Fabric/Wood: Soak in isopropyl alcohol, acetone, or paint stripper (test first on a small area).

Safety Precautions:

⚠ Refer to Material Safety Data Sheet (MSDS) before use.

• Skin Contact: Wipe off immediately; wash with soap and water.

• Eye Contact: Rinse with water for 15 minutes and seek medical attention.

Specifications:

• Mix Ratio: 2.5 : 1

• Weight: 1 lb ≈ 453 g

• Color: Dark gray steel-filled epoxy

• Brand Origin: Devcon (USA)